B-1 Rebar Coating and Bonding Agent
|
B-1 Rebar Coating and Bonding Agent is a special water-based rebar coating
and bonding agent designed for cement-based repair or overlay toppings.
Once B-1 Rebar Coating & Bonding Agent (about 30 minutes to 1 hour) cement
based topping can be applied or up to 5 days later.
Main Use: Cement based repair
Application : Apply at approximately 5-7 mils
Working Time : See application instructions
Foot Traffic : See application instructions
Item #
|
Unit Size
|
Units per Case or Pallet
|
Approx Yield
|
Cost per Unit
|
|
|
|
|
|
|
|
|
|
|
|
JE Tomes & Associates, Inc. 2513 West 140th Place Blue Island, IL 60406
Phone (708) 653-5100 Fax (708) 653-5101 Toll Free Customer Service 1-877-JETOMES www.jetomes.com
|
© JE Tomes 2010 All rights reserved. Reproduction of material appearing on this Web site is strictly prohibited without written permission.
|
JE Tomes &Associates, Inc. Rock Solid Products Since 1935
|
B-1 Rebar Coating Features
|
|
Where To Use Apply By Brush or Spray
|
|
Water-Base: 1 Component
No Mixing / No Waste
Including Rust Converter
Including Migrating Corrosion Inhibitor
Bonding Agent for Concrete Repair or Concrete Overlay Material
Up to 5 Days From Application To Cement Based Repair or Topping Material
Breathable - Not a Vapor Barrier
|
|
Reinforcing Steel
Concrete Substrates
Protect Rebar from Further Corrosion
Rebar Coating & Bonding Agent in 1 Coat
Corrosive Environments
|
|
|
Leadership In Restoration
|