| The above colors are for Guideline use. We recommend applying a sample before actual use. |
| Below are pictures of the nine popular colors that the Dry Latex Concrete comes in. The Samples shown below are 1/2 brush coat and1/2 troweled. If you would like to see a larger view of a particular color, please click on the picture itself or the corresponding picture name. |
| Tint Crete |
| JE Tomes & Associates, Inc. 2513 West 140th Place Blue Island, IL 60406 (877)JE-TOMES or (877-538-6637) (708)653-5100 phone 708-653-5101 facsimile |
| JE Tomes & Associates, Inc. Rock Solid Products Since 1935! |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |  |  |  |  |
| Restoration Leadership |
TintCrete R (Patching Mortar/Resurfacing): Always add and mix product into water. Approximately 6-8
quarts of water is required to mix 40 lb of product. Hold back 1 part water, mix for 2-3 minutes and adjust at
final mixing stage to desired consistency. Use the same amount of water per pound of material for consistent
color.
quarts of water is required to mix 40 lb of product. Hold back 1 part water, mix for 2-3 minutes and adjust at
final mixing stage to desired consistency. Use the same amount of water per pound of material for consistent
color.
TintCrete P (Patching Mortar): Always add and mix product into water. Approximately 3-4 quarts of water is
required to mix 50 lb of product. Hold back 1 part water, mix for 2-3 minutes and adjust at final mixing stage to
desired consistency. Use the same amount of water per pound of material for consistent color.
required to mix 50 lb of product. Hold back 1 part water, mix for 2-3 minutes and adjust at final mixing stage to
desired consistency. Use the same amount of water per pound of material for consistent color.
TintCrete C (Concrete Mix): Always add and mix product into water. Approximately 3 quarts of water is
required to mix 65 lb of product. Hold back 1 part water, mix for 2-3 minutes and adjust at final mixing stage to
desired consistency. Use the same amount of water per pound of material for consistent color.
required to mix 65 lb of product. Hold back 1 part water, mix for 2-3 minutes and adjust at final mixing stage to
desired consistency. Use the same amount of water per pound of material for consistent color.
| © JE Tomes 2006 All rights reserved. Reproduction of material appearing on this Web site is strictly prohibited without written permission. |
|
