Gun-Rite™ 475 HP

Economical, high performance, pre packaged mix

Repair Thickness

Tapered - 5"

Set Time

45 Minutes

Application Technique

Spray

Description

Gun-Rite 475 HP is a complete high performance shotcrete mix with proven durability and consistency. Gun-Rite 475 HP contains cement, aggregate, and a proprietary blend of modifiers. The widely used “Gun-Rite” formulation assures quality and durability.

Dependable and Durable

• Proven “Gun-Rite” durability
• Very low rebound & low waste
• Easy shooting and finishing
• High strength – Over 6500 psi

• High reactive pozzolan enhanced
• Extremely durable
• Portland Cement based
• Factory blended – One component

Where to Use

• Large and small structural repairs
• Bridge repairs
• Parking garage restoration
• Interior or exterior surfaces

• Wastewater tanks
• Slope stabilization
• Mines or manholes

Components

Gun-Rite 475 HP is a special blend of cement, aggregate, high reactive pozzolans, alkaline resistant fibers, water reducers, air entrainment, and exclusive modifiers. Designed for general-purpose and high performance wet method shotcrete applications.

Application

Apply in accordance with ACI 506R “Guide to Shotcrete.” After achieving a SSD condition, apply product while taking consideration for rebound and compaction around reinforcing steel. Shoot material at 90 degrees to the surface whenever possible. If multiple lifts are being used, apply succeeding lift after first lift has reached final set. For thicker lift applications, Gun-Rite Accelerator is recommended. If succeeding lift is not promptly placed, keep the surface moist. Cut off or level as required.

Packaging and Yield
Unit Size Approx. yield

60 lb. heavy-duty polyethylene bag
0.5 cu. ft.

3,000 lb. bulk bag
25 cu. ft.

JOIN OUR NEWSLETTER