Dry Latex Concrete™ Resurfacing Mix

The Ultimate Concrete Resurfacing Mix

Repair Thickness

Feateredge to ¼"

Set Time

1 Hour

Application Technique

Trowel, Brush, Spray

Description

Dry Latex Concrete Resurfacing Mix is a 1 component, polymer modified, high performance concrete repair and resurfacing mortar. Dry Latex Concrete Resurfacer Mix cures to a light gray color to imitate freshly poured concrete. It is simply mixed with water and applied from featheredge to 1/4″ thick in one application. Apply horizontal, vertical or overhead. Product sets in approximately 1 hour and is ready for light traffic in 6 to 8 hours at 70 degrees Fahrenheit when broomed or brushed.

Dependable and Durable

• Long working time
• Polymer modified
• Portland Cement based
• Apply by trowel, broom or brush
• One component – Just add water

• Shrinkage-compensated
• Light color matches most
• new concrete
• Custom colors available –
See TintCrete™ Resurfacer

Where to Use

• Concrete resurfacing
• Concrete patching up to ¼” thick
• Resurface pitted concrete

• Driveways, sidewalks
• Interior or exterior
• Balconies, parking garages

Components

Dry Latex Concrete Resurfacing Mix is a special blend of cements, aggregates and exclusive modifiers. Designed for general purpose and high performance concrete repair or resurfacing applications.

Application

Trowel or broom apply. Rub or scratch part of the mixed material onto surface just prior to application. For finer finishing use a concrete finishers broom. For thickness over 1/4″ apply in multiple applications, allowing material to dry between each application, or use CT-40 Do All Mortar.

Packaging and Yield
Unit Size Approx. yield

40 lb. bag
Also available: 10 lb. unit

40 sq. ft. @ 1/8” for patching or up
to 300 sq. ft. when broom applied

JOIN OUR NEWSLETTER