TintCrete™ Colored Concrete Resurfacer

Color tinted polymer modified resurfacing mortar

Repair Thickness

Featheredge to 1/4"

Set Time

1 Hour

Application Technique

Trowel, Brush, Spra


TintCrete™ Concrete Colored Resurfacer is a 1 component, polymer modified, high performance concrete repair and resurfacing mortar. TintCrete™ Color Resurfacer is available in 2 standard colors. It is simply mixed with water and applied from featheredge to 1/4″ thick in one application. Apply horizontal, vertical or overhead. Product sets in approximately 1 hour and is ready for light traffic in 6 to 8 hours at 70 degrees Fahrenheit when broomed or brushed.

Dependable and Durable

• Long working time
• Polymer modified
• Portland Cement based
• Apply by trowel, broom, brush or spray

• One component – Just add water
• 2 standard colors

Where to Use

• Colored Concrete resurfacing
• Driveways, sidewalks
• Concrete patching up to ¼” thick

• Balconies, parking garages
• Interior or exterior
• Resurface pitted concrete


TintCrete™ Colored Concrete Resurfacer is a special blend of cements, aggregates and exclusive modifiers. Designed for general purpose and high performance colored concrete repair or resurfacing applications.


Trowel or broom apply. Rub or scratch part of the mixed material onto surface just prior to application. For finer finishing use a concrete finishers broom. For thickness over ¼” apply in multiple applications, allowing material to dry between each application, or consider using TintCrete™ Colored Concrete Patch.

Packaging and Yield
Unit Size Approx. yield

3/10/50 LB Pail

0.34 cu. ft.